Werbung
Verfügbare Sprachen
Verfügbare Sprachen
procedure described above must be performed twice in
succession, within 5 minutes:
•
Reset the Access Point as described above.
•
Wait at least 10 seconds until the LED permanently
lights up blue.
•
Immediately afterwards, perform the reset for the
second time by disconnecting the Access Point
from the power supply again and repeating the
previously described steps.
After the second restart, your system will be reset.
8
Maintenance and cleaning
The device does not require you to carry out any
maintenance. Enlist the help of an expert to carry
out any maintenance or repairs.
Clean the device using a soft, lint-free cloth that is clean
and dry. You may dampen the cloth a little with lukewarm
water in order to remove more stubborn marks. Do not
use any detergents containing solvents, as they could
corrode the plastic housing and label.
Maintenance and cleaning
41
Werbung
