Geometry; Standard Search Selection - Colorlite Xs1 Bedienungsanleitung

6.7

Geometry

Under the menu "Geometry", the probe head version
can be selected. Also the "Stray light suppression"
function can be activated.
To manually select the
probe head adapter, go to
"Settings" menu and choose
"Geometry".
In the next window select
"Probe head" and press
"Center".
It opens another selection
window. Choose the desired
selection with the "Center"
key. The choice "Auto"
automatically detects the
connected probe head adapter
(factory setting).
The "Stray light suppression" measures any ambient
light that might be entering the probe head. This "stray"
light can aff ect the reproducibility and so this option
should be used if the opening of the sensor is not fully
covered by the sample or especially when measuring
transparent materials such as glass or translucent
materials. To activate the "Stray light suppression",
proceed as follows:

6.8 Standard search selection

The ColorLite sph xs1 off ers the user three methods of
selecting a standard from the memory. Change which
method to use in the menu "Settings" opening the window
"Standard selection" The three options are:
• "By index" selection is made by entering the index
number of the standard.
• "By list & Best Match" names of standards are listed
or measure any colour and the device fi nds the best
matching standard colour.
• "By name" enter the name of the standard.
ColorLite GmbH | sph xs1
Please choose "Geometry" from
menu "Setting". Turn on the "Stray
light suppression" by selecting the
appropriate menu item and confi rm
with „Center".
Geometry
65