Observer Angle; Illumination - Colorlite Xs1 Bedienungsanleitung

Observer angle

Change of stored limit values:
1. Download the standard you want to change via the
menu item „select standards" in the „Measure"
menu.
2. Select „Settings" and then „Pass / Fail" Function
3. Change the limits as before.
If you leave the menu, a message appears asking if the
limit of the loaded standards should be changed. Press
Enter to confi rm. This query window only appears if a
standard has been loaded from memory.
6.5 Observer angle
You have the option to choose between a 2 degree or 10
degree observer.
The selection is made in the
"Settings" menu. The active value
is displayed on the "Angle" menu
line. The default setting is "10°".
Use the up/down
to select the observer angle and
confi rm your selection by pressing
"Center".
64
6.6
The standard illuminant for calculating the colour
value scan be selected or changed.
arrow keys
ColorLite GmbH | sph xs1

Illumination

The active standard illuminant
is displayed in the menu
position
"Illumination". The default
setting is the Daylight
illumination "D65".
From main menu, choose
"Settings" and then
"Illumination". Confi rm your
selection with the "Center"
key. In the following window
you can choose between
several standard illuminants.