Technical Data; Description; Installation - Dustcontrol DC 3800 Stat Originalbetriebsanleitung

Technical Data

HxWxL fl oorconstruction
HxWxL wallconstruction
Weight
Inlet
Collection in container
Max Temp
Flow, max
Neg. pressure, max
Power consumption
Manual reverse pulse
fi lter cleaning
Fine fi lter polyester, area
Degree of separation
A fi ne fi lter, polyester (Part No 42025), is mounted in the ma-
chine. A HEPA fi lter is available as optional equipment.
Soundlevel

Description

Th e DC 3800 Stationary is a dust extractor suitable for
the extraction of dust, powders and chips and also for
cleaning.
Th e dust laden air is introduced into the units cyclone where
most of the dust is separated by the cyclonic action of the
air. Th is dust falls to the bottom of the cyclone where it is
emptied into a plastic sack. Th e air then passes through
the fi ne fi lter and is exhausted through the pump. HEPA

Installation

Th e machine should be equipped with a suitable electrical
starter and installed by a certifi ed electrician. Th e unit
should be equipped with a lockable disconnect.
2014-10-23
50 Hz/60 Hz
1400x400x860 mm
1440x400x790 mm
50 kg/50 kg
 50 mm/ 50 mm
kPa
20
30 l/30 l
130°/130°
3 3
260 m /h/320 m /h
28 kPa/30 kPa
2.2 kW/3 kW
10
1.8 m 2 1.8 m 2
> 99,9 %/> 99,9 %
<75 dB(A)/<75 dB(A)
fi ltration is available as an option.
Th e vacuum is produced by an motor driven turbopump.
Th e turbopump is a regenerative blower where a direct driven
impeller rotates in the pump housing. Th e tolerances of the
unit are very small so that it is possible to attain the highest
effi ciency. Because the pump compresses the air, it is natural
that it becomes hot while running.
Connect the tubing system to the inlet and outlet of the
machine. Install and tighten a plastic sack under the cy-
clone.
DC 3800 Stat - 9
Vacuum producer
capacity
DC 3800 3.0 kW 60 Hz
DC 3800
2.5 kW 50 Hz
100 200 300 400
3
500 m /h
Part No 9443