Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PROBLEM
Ice cubes on the
evaporator stick
together.
Ice making cycle is
normal but no ice is
being made.
TECHNICAL PARAMETERS & CIRCUIT DIAGRAM
TECHNICAL PARAMETERS
Model
Protection Type
Climate Type
Power
Ice Making Current
Ice Harvest Current
Refrigerant
Net Weight
Vesicant
Enclosure
POSSIBLE CAUSE
The ice cycle is too long. Stop the ice maker and restart
Water temperature inside
the tank is too low.
Ambient temperature or
water temperature inside
the tank is too high.
Refrigerant liquid
leakage.
Pipe in the cooling
system is blocked.
800-141
I
SN/N/ST/T
220-240V~50Hz
0.8A
1.0A
R600a/32g
9.5 kg
C H
5
1 0
Plastic
it once the ice melts. Select the
'small ice cube' cycle.
Change the water inside the
tank. Temperature of the water
is best between 7℃-32℃.
Ensure the ice maker is below
32℃.Poor cold water into the
tank.
Check with a qualified
technician.
Check with a qualified
technician.
9
SOLUTION
Werbung
