Werbung
Verfügbare Sprachen
Verfügbare Sprachen
C Putting into Operation
6.
Troublesshooting
Display
No display
Does not respond
to pushing a button
Does not respond by
pushing ON or OFF
button
Error
1) No battery inserted
2) Battery not inserted
the rigth way round
(positive and negative
terminals incorrect)
3) Batteries flat
Battery symbol and
simultaneous beep
have been ignored by
the user for a lengthy
period of time
4)Battery contact error
Microprocessor faulty,
e.g. due to thunderstorm
1/2" cartridge does not
open or close.
Operation torque is too
high.
Remedy
Insert batteries in the
battery compartment
with the terminals the
rigth way round ( see
Battery Change)
Check batteries (see
Battery Change)
Insert new batteries the
rigth way round (see
Battery Change)
Clean
the
battery
contacts so that the
metal shines
Disconnect the batteries
briefly
(see
Battery
Change)
Change
the
1/2"
cartridge ( 14 ) as
described in chapter D2
Page 20
Werbung
