Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A Operating Instructions
1.8
ECO functions for shower programmes
In addition to the normal function of indicating water consumption
(see 1.7) other functions can be set with the ECO button.
If you press the ECO button in the OFF mode for 5 sec. the water
consumption indicator shows the ECO symbol. In this mode there is
a beep after each wave disappears and when all the waves have
disappeared there is a multiple beep.
If you press the ECO button for another 5 sec. the shower will switch
off and all the waves have disappeared. The unit can only be
started up again after approx. 2 min., when all the waves are
shown on the display again. Activation of this consumption limiter
is indicated by the flashing ECO symbol on the display.
If you press the ECO button for another 5 sec. the neutral initial
status is resumed (indication of consumption only) and the ECO
symbol disappears.
1.9
Time
By pressing the TIME button you can call up the time of day. It is
possible in the OFF mode and in the ON mode. The temperature
display disappears briefly and the time of day is flashed up.
Note: How to set the time is described in section 4.1 of C Putting into
Operation.
Note: Switching from the 24 h mode to the 12 h mode is described
in section 4.2 of C Putting into Operation.
100 %
ECO
ECO
Page 7
Werbung
