Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A Operating Instructions
1.2
ON/OFF
Pressing ON starts up the unit.
The temperature display flashes until the set water temperature
has been reached.
Pressing OFF (or ON) stops the unit.
Note: When the supply of hot water has been used up or the boiler
is not switched on, the unit will flash.
1.3
Temperature setting
Pressing the TEMP buttons raises/lowers the desired temperature on
the display.
An adjustment can be made in the ON mode and in the OFF
mode.
Note: Scald-proofing at high temperatures:
Temperatures above 43°C can only be set at a very slow rate. Two
minutes after a stop the temperature automatically returns to the
maximum figure of 43°C.
Note: The maximum temperature which can be set is 48°C.
OFF
°C
TEMP
ON
Page 4
Werbung
