General Safety Instructions - Lenze 8200 motec Montageanleitung

1 Safety instructions

General safety instructions

General safety instructions

Danger!
Disregarding the following basic safety measures may lead to severe personal
injury and damage to material assets!
ƒ Lenze drive components ...
... must only be used as directed.
... must never be commissioned in the event of visible damage.
... must never be technically changed.
... must never be commissioned before assembly has been completed.
... must never be operated without required covers.
... can include live and rotating parts - depending on their type of protection - during and
after operation. Surfaces can be hot.
ƒ All specifications of the corresponding enclosed documentation must be observed.
This is vital for a safe and trouble-free operation as well as for achieving the specified
product features.
The procedural notes and circuit details provided in this document are proposals which
the user must check for suitability for his application. The manufacturer does not accept
any liability for the suitability of the specified procedures and circuit proposals.
ƒ Only qualified, skilled personnel is permitted to work on and with Lenze drive
components.
According to IEC 60364 / CENELEC HD 384, these are persons who ...
... are familiar with the installation, mounting, commissioning, and operation of the
product.
... have the qualifications required for their occupation.
... know and are able to apply all national regulations for the preventions of accidents,
directives and laws applicable on site.

Danger!
Observe the safety instructions and residual hazards included in the
instructions for the standard device.
36

EDK82ZMFBC-001 DE/EN/FR 7.0