Geberit ACO 102 Betriebsanleitung Seite 11

Original operating instructions
Safety
Basic safety notes
- Read through and observe the enclosed safety notes before commissioning the tool
- Read through the operating instructions before commissioning the tool and follow the instructions they contain to the
letter
- Keep the operating instructions and the safety notes together with the tool
- Follow the country-specific safety regulations
Symbols in the instructions
Symbol
CAUTION
Symbols on the device
Symbol
Target group
This tool may only be used by skilled persons in accordance with EN IEC 62079:2001.
Intended use
The ACO 102 pressing tool is only allowed to be used for pressing pipes and pressfittings of the Geberit Mepla and
Geberit Mapress pressing systems.
Only tools and accessories with the compatibility mark
compatibility and the maximum pressing areas can be found in the country-specific product range catalogues.
The pressing tool is not suitable for continuous operation. After 30 minutes of continuous operation, a break of at least
15 minutes must be taken to allow the pressing tool to cool.
Any other use or a use extending beyond the intended application is deemed to be improper. Geberit will not accept any
liability for any resulting damage.
Meaning
Refers to a dangerous situation that may cause slight or moderate injuries or material
damage
Refers to important information
Meaning
Refers to a possible dangerous situation caused by flying fragments
Read the safety notes and operating instructions before commissioning the tool
Operation of the retaining pin
Service sticker: Indicates the time of the next maintenance
are allowed to be used. The relevant overviews regarding
Safety
DE
EN
FR
IT
NL
ES
PT
DK
NO
SE
FI
IS
PL
HU
SK
CZ
SL
HR
SR
EE
LV
LT
BG
RO
GR
TR
RU
AE
CN
JP
11