Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Dräger recommends mounting a full face mask to
the test head until the moisture between the test
head and the gel face has evaporated (e.g.
overnight) and then commencing the test.
8
Transport
Only transport the test unit when it is switched off. The
test unit must not be used during transportation in a
vehicle.
For safety reasons, Dräger recommends lifting and
carrying the device with one hand on the handle and
the other hand on the high pressure port.
Do not dispose of the packaging! It must be used for
all servicing.
9
Storage
Store the test unit in a dry place. Avoid direct sunlight
and temperatures above 60 °C.
10 Technical data
Dimensions with test
head
Weight
(Fully equipped, incl.
test head)
Operating tempera-
ture
(When used indoors)
Storage temperature
Permissible humidity
Instructions for use
|
Dräger Quaestor 4000/6000/8000
50 x 55 x 65 cm
23 kg
0 °C to +40 °C
-30 °C to +60 °C
0 to 90 % rel. humidity,
non-condensing
Permissible ambient
pressure
Permissible height
Permissible degree
of contamination
Input voltage
Compressed air sup-
ply
Accuracy of the pres-
sure sensors
Measuring ranges
High pressure sensor
Medium pressure sen-
sor
Low pressure sensor
Low pressure for tests
on diving equipment
Q6/8 only
Respiratory rate for the
artificial lung
Stroke volume
11 Disposal
This product must not be disposed of as house-
hold waste. This is indicated by the adjacent sym-
bol.
You can return this product to Dräger free of
charge. For information please contact the
national marketing organizations or Dräger.
Transport
800 to 1200 hPa
2000 m
2
24 V DC
180 VA via external
power supply unit (100-
240 V AC ±10 %, 50-
60 Hz)
Compressed air cylinder
or
stainless steel piping for
300 bar
Class <1.0 according to
DIN EN 837
0 to 350 bar
0 to 25 bar
-40 to +30 mbar
-70 to +30 mbar
5 to 40 strokes/min
max. 3.4 l
|
21
Werbung
