Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
Specification
If the flow rate is too high:
f Turn the angle valve towards the closed position until the
measured flow rate corresponds to the maximum permissi-
ble flow rate.
If the flow rate is too low:
f Remove the restrictor.
f Shorten the restrictor so that the larger opening is complete-
ly free.
4
3
1 Short connection hose for cold water
2 Angle valve in the cold water line
3 Restrictor, shortened
4 Restrictor
f Fit the shortened restrictor into the blue-marked connection
hose on the angle valve.
28
| MAE-K | MAE-W | WST-W
1
2
f Measure the flow rate again.
f Adjust the flow rate with the angle valve if necessary.
9.
Specification
9.1
Dimensions and connections
MAE-K
Ø53
222
www.stiebel-eltron.com
Werbung
