Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
Tap installation
f Screw the short threaded section of the threaded rod into the
tap from below.
Property damage
!
f Tighten the connection hoses until finger-tight only.
Do not use pliers or a spanner.
f Ensure that the hoses are not twisted or under ten-
sion.
f Screw connection hoses A, B and C until finger-tight into the
corresponding threaded holes on the tap from below. Ob-
serve the markings on the tap and hose.
f Insert the tap with the O-ring into the hole from above.
f Secure the tap onto the threaded rod from below with the
soft profile washer, U-shaped pressure washer and hexagon
nut.
f Insert the tundish with the gasket into the drain from above.
f Push the profile gasket onto the tundish from below.
f Screw the drain funnel into the tundish from below.
24
| MAE-K | MAE-W | WST-W
1
2
2
1 Pull rod
2 Knuckle joint
3 Drain cup
3
www.stiebel-eltron.com
Werbung
