STIEBEL ELTRON MAE-K Bedienung Und Installation Seite 22

INSTALLATION
Tap installation
6. Tap installation
6.1 MAE-K mono lever mixer tap (non-pressurised)
for sinks
10
7
9
8
22 | MAE-K | MAE-W | WST-W
1
2 3 4
6
5
A
B
C
1 Aerator
2 Connection hose C
3 Connection hose B
4 Connection hose A
5 Restrictor
6 Threaded pin
7 Hexagon nut (spanner size 12)
8 U-shaped pressure washer
9 Soft profile washer
10 O-ring
f Screw the short threaded section of the threaded rod into the
tap from below.
Property damage
!
f Tighten the connection hoses until finger-tight only.
Do not use pliers or a spanner.
f Ensure that the hoses are not twisted or under ten-
sion.
f Screw connection hoses A, B and C until finger-tight into the
corresponding threaded holes on the tap from below. Ob-
serve the markings on the tap and hose.
f Insert the tap with the O-ring into the hole from above.
f Secure the tap onto the threaded rod from below with the
soft profile washer, U-shaped pressure washer and hexagon
nut.
www.stiebel-eltron.com