Wheel Installation - Trek KICKSTER Anleitung Zur Montage Und Nutzung

WHEEL INSTALLATION

FIGURE 1:
Parts.
FIGURE 3:
Washer on axle with tab
in hole.
FIGURE 5:
Tighten to 40.0-45.0 Nm.
2 Trek Service Information
HANDLEBAR INSTALLATION
FIGURE 2:
Axle in fork.
FIGURE 4:
Nut on axle.
FIGURE 1:
Parts.
FIGURE 3:
Insert into frame. Minimum
insertion line must be
inside frame. 90°
FIGURE 5:
Tighten to 8 Nm max.
Trek Service Information
FIGURE 2:
Apply bicycle grease.
FIGURE 4:
Align.
3