Werbung
Verfügbare Sprachen
Verfügbare Sprachen
POWER
SOURCE
AC Supply Voltage Selector
Take care to check the voltage setting of the voltage selector before connecting
co)
AC 220
AC supply lead plug to the AC outlet, If necessary, adjust the setting as follows:
oe
~240V
1
Loosen the securing screw of the supply voltage selector.
2 Slide the panel to the left or to the right until the correct voltage reading is
seen on either side.
AC110
3
Secure the screw.
~120V
220~240V
HO~120V.
©®
Do not use this unit with AC main voltages other than those specified, as this may result in damage,
fire, etc.
SHARP
may
NOT
be held
responsible
for damage resulting from the use of this unit
with unspecified voltages,
Operation from AC Power Supply
Notes:
inserting
the AC
supply
lead
into the unit
|
automatically
disconnects
the batteries, As a
v Attach the AC supply lead as shown.
ia
fa
\}
Ne
18)
from the unit in order to operate the unit on
|
battery power,
=| We suggest that AC power be used whenever
possible in order to conserve the batteries.
™ Disconnect the AC supply lead plug from the
AC outlet when the unit is not used for long
periods.
Warning:
When
this unit is not in use, also before attem-
pting any
internal examination, pull the mains
plug out of the wall socket.
Operation from DC Power Supply: Batteries
Disconnect the AC supply lead from the unit.
Slide the FUNCTION
selector to the )/TAPE
position,
Remove the battery compartment cover.
Insert six new batteries (1.5V cell x 6) — UM/
SUM-1
or R20 type — into the compartm
Replace the battery compartment cover.
a &O
b=
Precautions for Battery Use
a
Improper
use
of batteries
may
cause
leakage or (3) Do not'use batteries of different kinds together.
explosion.
Batteries of the same size may differ in voltage.
Therefore, observe the following precautions:
(4) Remove
all the batteries from
the unit when
(1) Correctly
insert batteries with their polarity as
they are used up or when not in use for extend-
indicated on the unit.
ed periods of time.
(2) Avoid
using a new
battery and an old one
(5) Batteries are available in two types: recharge-
together
—
when
one
battery
needs
to be
able and non-rechargeable. Before use, carefully
replaced, change others at the same time.
read the cautions on the battery.
A
[E) 2
Werbung
