Herunterladen Diese Seite drucken

Eufab James Handbuch Seite 15

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Caution:
The safety instructions must be observed!
Observe the authorised axle load.
Before starting each journey and at regular intermediate intervals, check that the carrier is sitting
firmly on the vehicle and that the wheels are properly fixed to the carrier, in order to detect and
rectify any damage to the fixing elements at an early stage.
Before starting each journey and at regular intermediate intervals, verify the correct function of the
lighting system on your rear carrier.
With new hitches, there is frequently a thick black layer of paint on the tow ball. In order for your rear
carrier to gain the best possible grip, this layer of paint should be removed, using corrosive fluid,
solvents etc.
The load must not protrude sideways over the lighting by more than 400mm.
The load must be fixed from the safety belt!
Parts that can be lost, e.g. such as air pumps, baskets, bells etc must be removed before starting the
journey.
Driving with a bike carrier affects the driving characteristics of a vehicle. You should therefore adjust
your driving speed. Avoid sudden and jerky steering movements.
When reversing, note that the carrier makes your vehicle longer than normal!
When not in use, the bike carrier should be removed.
When transporting bikes, do not cover with a blanket or similar.
The maximum speed is 130 Km/h
For proper and safe fitting, follow the fitting instructions precisely. If in doubt when referring to
these instructions, ask the dealer or the manufacturer directly for further information. For your own
safety, regularly check the carrier and its loading, as you are obliged to do so under § 23 of the
German highway code and will be held liable in the event of damage.
The manufacturer and dealer will not be liable for damages to property or injuries to people caused
by incorrect fitting or improper use.
The product has been tested and tried even under extreme conditions and produced good results
with respect to safety and grip. We are therefore able to exclude malfunctions if the fitting has been
carried out correctly.
Dear Customer, in observance of the German highway code and the existing bearing load and max.
loading capacity, this rear bike carrier may also be used for transporting other goods or objects.
However, secure fixing of these goods or objects must be guaranteed.
15

Werbung

loading

Diese Anleitung auch für:

11417