Eufab James Handbuch Seite 11

Art. Nr. 11417
Cycle rack JAMES
CYCLE TRANSPORTATION ON THE TOWBAR
With EG-BE (European type-approval)
-
Does not need to be presented to TÜV
-
Does not need to be entered into the vehicle papers
-
Easy loading and unloading
-
Approved for use when empty
-
For transporting up to 3 cycles of any type
-
Secure attachment on the cycle frame
-
No problems when passing low entrances or entering garages and car parks
-
Saves on petrol thanks to low wind resistance properties
-
Towbar conditions
The cycle rack can be mounted onto all towbar balls under the following conditions. The maximum
useful load of the "James" cycle rack is: 60 kg. The respective value is stated on the type plate of the
rack. Test the suitability of the towbar. The towbar type must have been officially approved. The ball
and towbar itself need to be cast as one part. The towbar material must have a minimum quality of
St 52-3. S
Supporting load
50kg
60kg
75kg
90kg
Note: Usually the towbars are made of St 52-3. Cast material such as e.g. GGG 40 is not suitable (only
suitable from GGG 52 upwards). following towbars are currently made of GGG 40:
If in doubt ask the manufacturer of the towbar.
Assembly instructions
Dear customer,
Thank you for purchasing this product. This rear cycle rack has been checked to see it is complete.
The rear rack is epoxiert, and the hollow spaces are coated inside which prevents the metal rusting.
If this coating is impaired in any way (scratched, damaged), ensure that the protection is repaired!
Before starting to assemble the product, ensure that the rear cycle rack is complete and read the
assembly instructions carefully; observe the safety information. Please remember that some of the
parts included in the parts list have already been pre-assembled. Subject to technical amendments
Manufacturer of the towbar
Westfalia
Deadweight
14 kg
14kg
14kg
14kg
Test symbol
F 4192
F 3830
F 4112
11
Useful load
36kg
46kg
max. 60kg
max. 60kg
Suitable forvehicle type
Audi A4
Audi A6
Audi A8