Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Safety Instructions
Before starting the engine, read the op-
Implements and weights influence the
erating instructions and note:
driving, steering, braking, and tip-over
characteristics of the power harrow.
Therefore, ensure steering and braking
functions are sufficient. Match operating
Warning
speed to conditions.
Do not change settings of governor.
This symbol marks all paragraphs in
High engine speed increases risk of
these operating instructions which con-
accidents.
cern your safety. Pass all safety instruc-
tions to other users and operators.
Working Area and Danger
Also read and observe the safety
Zone
regulations
in
the
operating
instructions for the engine.
The user is liable to third parties work-
ing within the machine's working range.
Due Use
Staying in the danger zone is not per-
The front mounted power harrow,
in
mitted.
conjunction with a driving motor, is built
Check the immediate surroundings of
for tilling the ground in one operation,
the machine before you start it. Watch
for levelling it off and thus preparing it
out for children and animals.
ready for seeding (due use).
Before you start work, clear the area
Any other type of operation is consid-
from any foreign object. During opera-
ered undue. The manufacturer is not li-
tion, always watch out for further ob-
able for any damage resulting from un-
jects and remove them in time.
due use, for which the risk lies with the
For operation in enclosed areas, ensure
user alone.
that a safety distance is kept to enclo-
Due use includes compliance with
sures to prevent damage to tools.
manufacturer's instructions on opera-
tion, maintenance and repair.
Operation and
Any unauthorized changes to the power
Safety Devices
harrow render manufacturer liability null
and void.
Before Starting the Engine
General Instructions on
Become familiar with the devices and
operating elements and their functions. Above
Safety and Accident
all, learn how to shut off the engine quickly
Prevention
and safely in an emergency situation.
Ensure that all protective devices are
Basic Rule:
mounted and positioned to provide pro-
tection.
The standard accident prevention regu-
lations must be adhered to, as well as
With no implement mounted, make
all other generally accepted rules gov-
sure PTO-shaft is covered with the pro-
erning operational safety, occupational
tective cap.
health and road traffic regulations.
Starting the Engine
For drives on public roads, the latest
traffic code applies.
Do not start engine in closed rooms. The
carbon monoxide contained in the exhaust
Accordingly, check the power harrow for
fume is extremely toxic when inhaled.
road and operational safety each time
you take up operation.
Before you start the engine set all operat-
ing elements to neutral or idling position.
Only persons familiar with the power
harrow and instructed on the hazards
For starting the engine, do not step in
of operation are allowed to use, main-
front of the machine.
tain and repair the power harrow.
Do not use assist-starting liquids when
Young persons of 16 years or younger are
using electrical assist-starting devices
not permitted to operate the power harrow!
(jumper cable). Danger of explosion.
Only work in good light and visibility.
Operation
Operator's clothes should fit tightly.
Never leave the operator's position at
Avoid wearing loosely fitting clothes.
the steering handle while power harrow
Wear solid shoes.
is at work.
Note the warning and instruction signs
Never adjust the operating handles dur-
on the power harrow for safe operation.
ing work – danger!
Compliance is for your own safety.
For all works with the power harrow, in
When transporting the machine on vehi-
particular for turning, the machine op-
cles or trailers outside the area to be culti-
erator must keep the distance to the
vated, ensure that the engine is shut off.
machine given by the steering handles.
Careful with rotating tools – keep at a
Riding on the implement during opera-
safe distance!
tion or in transport is not permitted.
Beware of coasting tools. Before you
Switch off the power take-off when
start any maintenance or repair on
transporting.
them, wait until tools have come to a
complete stop.
If clogging occurs in the implement, shut
off the engine and clean the implement
Foreign powered parts shear and
with an appropriate tool.
squeeze!
In case of damage to the power harrow,
Riding on the attachment during opera-
immediately shut off the engine and
tion is not permitted.
have it repaired.
998 353-A
agria Type 3477 332, -333, -342, -343, -352, -353
If steering causes problems, immedi-
Ensure that you re-install all safety and
ately bring the power harrow to a halt
protective devices and bring them into
and turn it off. Have the malfunction re-
their protective position after mainte-
moved without delay.
nance and cleaning.
To prevent the machine from sliding on
Only use original agria spare parts. All
slopes make sure it is secured by an-
other commercial spare parts must cor-
other person using a bar or a rope. This
respond to quality and technical require-
person must stay at a higher position
ments specified by agria.
than the vehicle and at a safe distance
from the attachment at work.
Storage
If possible, always work across the slope.
It is not allowed to store the base ma-
End of Operation
chine and the power harrow in rooms
with open heating.
Never leave the power harrow
unattended with the engine running.
Never park the machine in closed rooms
with fuel left in tank. Fuel vapours are
Before you leave the machine, shut off
hazardous.
the engine. Then close fuel taps.
Secure the machine against unauthor-
Explanation of
ized use. If the machine is equipped with
ignition key, remove the key. For all other
Warning Signs
versions, remove spark plug connector.
Before any cle-
aning, maintenance
Implements
and repair work
shut off the engine
Only mount implements with the engine
and pull starter key.
and the attachment drive shut off.
Always use appropriate tools and wear
With engine running,
gloves when changing implements and
keep at a safe dis-
parts thereof.
tance from tilling
For mounting and dismounting imple-
tools.
ments bring stand into proper position
and ensure stability.
Do not work without
protective covers
Secure base machine and implements
mounted. Before
against rolling off (parking brake, wheel
starting the engine,
chocks).
bring covers in
Beware of injuries while coupling imple-
proper position.
ments. Work with particular care.
Hitch implements as specified and only
Danger - objects
couple at specified points.
may be catapulted,
in particular on stony
Secure power harrow against unauthor-
ground.
ized use and rolling off when you leave
Stay clear while
the machine. If necessary, install trans-
engine is running.
port or security devices and secure.
Explanation of Symbols
Observe the advice for blocking the
overdrive as shown in the operating
instructions for the base machine.
Warning – Danger
Power harrow
Important information
Ensure that the lattice roller is set
correctly.
refer to Operating Instructions
On the lattice roller are sharp points
Wear protective gloves
and there is also a danger of crushing
Keep clear!
Always wear protective gloves when
Engine Start
making adjustments!
Transmission oil
Maintenance
Never carry out any maintenance or
Transmission oil level
cleaning with the engine running.
Before you work on the engine, on the
tilling tools, or on the power harrow,
Clutch
always remove spark plug connector
(only for petrol engines).
PTO
Check regularly and, if necessary, re-
place all protecting devices and tools
Forward
subject to wear and tear.
Replace damaged tilling tools.
Reverse
Always wear safety gloves and use proper
Parking brake
tools when exchanging tilling tools.
Keep the machine and implement clean
Open (unlocked)
to avoid risk of fire.
Check nuts and bolts regularly for tight
Closed (locked)
fit and re-tighten, if necessary.
2. Specifications
Specifications
Power harrow with adapter )* ............. 3477 332 ......... 3477 342 ....... 3477 352
Power harrow without adapter ............ 3477 333 ......... 3477 343 ....... 3477 353
Working width .......................................... 75 cm .............. 90 cm .......... 100 cm
Working depth max. 13 cm, 6 steps
Number of prongs .......................................... 10 .................... 10 .................. 12
Prong fitment screws ..................................... 20 .................... 20 .................. 24
Power take-off revs.: 825 - 900 min/1
Transmission: Angular bevel gear drive Spur wheel
Lubricant GP00
abt. .......................... 2,4 kg .............. 2,6 kg ............ 3,1 kg
Weight: (without adapter) ....................... 105 kg ............. 110 kg ............. 116,5
Adapter 3455 051 = 12 kg
Dimensions: (mm)
B ................................................................... 900 ................ 1050 .............. 1150
b (Working width) ........................................ 750 .................. 900 .............. 1000
h ................................................................... 450 .................. 450 ................ 450
l .................................................................... 660 .................. 660 ................ 660
)* = Power harrow with adapter 3455 051 for agria-type 3400, 5500 und 5900
Wear parts (agria Order No.) : Prongs= ....... 779 53
Prong fitment screws = ....... 000 14
Locking nut = ....... 281 10
4
5
3
3
2
1
1 Lattice roller
2 Cleaner bar for lattice roller
3 Transmission
4 Grading plate
5 Setting rod for
adjusting the lattice roller
6 Connecting flange
7 Control lever
8 Factory plate
9 Protective guard
Description
The power harrow, in conjunction with
a driving motor, is capable of tilling the
ground in one operation, levelling it off
and thus preparing it ready for seeding.
The ground is graded and levelled
off with the blade whose height is able
to be adjusted.
The fine clods on the surface are
reached by the rotating prongs.
The working depth and the final
compaction of the earth is set by the
lattice roller.
agria-Werke GmbH • D-74219 Möckmühl • Tel. +49/(0)6298/39-0 • Fax +49/(0)6298/39-111 • e-mail: info@agria.de • Internet: www.agria.de
Operating
Instructions
Translation of the original operating instructions
Power harrow
3477 332, -333, -342, -343,
-352, -353
3477 332 - 333 = 75 cm
3477 342 -343 = 90 cm
3477 352 -353 = 100 cm
4550
M10x40 DIN 931 - 8.8
Before commissioning the machine, read operating instructions
M10 DIN 980 - 8
and observe warnings and safety instructions.
6
Operating Instructions No. 998 353-A
7
4
8
The technical information, illustrations and measures given in these instructions
are not binding. Claims of any kind cannot be derived from them.
We reserve the right to make improvements without changing these instructions.
9
06.12
5
Werbung
Inhaltsverzeichnis
