Mounting and Installation
Connection sketches for the installer:
3× 220-240/400 V, 3~N
16A
1× 220-240V, 1~N
40A
64
Notes:
Connect
Black on L1
Brown on L2
Grey on L3
Blue to neutral conductor / N
Yellow-green on PE
If you are not sure, contact the customer service.
Notes:
If connected to one phase, the original cable
must not be used!
A new cable is not included in the delivery!
The cable cross-section must correspond
to the fuse protection!
Bridges must be used for the connection box
of the hob!
The appliance is not suitable
for operation with an EU plug!