Medion MD 81209 Bedienungsanleitung Seite 53

MD 81209 manual DE_GB_FR_IT_ES.book Seite 27 Montag, 27. Februar 2006 10:33 10
T
ROUBLESHOOTING
If errors occur, check first that the system was set up
correctly. The following overview may help you:
No audio/video transmission
• Are all mains adapters plugged in?
• Are the transmitter and the receiver switched on?
• Are the channels for the transmitter and the receiver the
same?
• Is the transmission source switched on?
• Walls and ceilings can reduce the signal range.
• Check the connections to the connected devices.
Poor reception quality
• Realign the transmitter and receiver aerials.
• Change the position of the transmitter and the receiver
slightly.
• Interference can be caused by several factors, such as
radio waves from other devices.
• Choose a different channel.
The remote control does not react
• Point the remote control directly towards the receiver.
• The infrared transmitter's diodes should be approx. 1 cm
away from the infrared receiver of the audio/video source.
• Have you aligned your infrared diodes correctly?
27
GB