Medion MD 81209 Bedienungsanleitung Seite 49

MD 81209 manual DE_GB_FR_IT_ES.book Seite 23 Montag, 27. Februar 2006 10:33 10
Example of receiver setup
The diagram below shows a typical setup for the receiver
and a TV, either with the Mini DIN AV cinch cable or a SCART
adapter.
Interposing a device
Instead of connecting the receiver directly to the television,
you can also interpose a different audio/video device. This
could be a video recorder, for example, which you can then
connect with the receiver as already described.
Connecting the mains adapter
• Connect the mains adapter for the receiver to the 9 volt
connector on the receiver.
• Plug the mains adapter into an easily accessible socket
(230V ~ 50Hz).
• Turn on the receiving device, such as the television, and
set the receiver's ON/OFF switch to the ON position. The
23
GB