Medion MD 81209 Bedienungsanleitung Seite 33

MD 81209 manual DE_GB_FR_IT_ES.book Seite 7 Montag, 27. Februar 2006 10:33 10
Assigning the radio transmitter and receiver
The transmitter in the radio transmission system is
connected to the audio/video source and the receiver is
connected to a television or video recorder. The three core
AV cinch cable or the SCART adapter is used to connect the
three types of signal – video, audio right and audio left – to
GB
the system.
Controlling the audio/video source remotely
You can use the audio/video source remote control to
control these devices from the point where the receiver is
located. The (infrared) remote control signals are converted
and transmitted as radio signals. The transmitter converts
the radio signals back into an infrared signal. The two
infrared transmitters in the infrared extender then send
these signals on to the relevant devices.
Scart or Cinch
If the audio/video source has a SCART connection, use the
SCART adapter for the transmitter. If the device connected
to the receiver has a SCART connection use the SCART
adapter for the receiver.
If the device connected to the receiver does not have a
SCART connection use one of the three core cinch cables.
If the audio/video source has a 3.5mm audio output use the
audio adapter supplied.
7