Medion MD 81209 Bedienungsanleitung Seite 40

MD 81209 manual DE_GB_FR_IT_ES.book Seite 14 Montag, 27. Februar 2006 10:33 10
Infrared extender (for remote control)
You have to connect the infrared extender if you want to be
able to use the remote control from where the receiver is
positioned.
• Connect the plug on the infrared extender to the IR EXT
socket on the transmitter (see diagram on previous page).
• Remove the paper backing from the sticky surface of one
of the two IR transmitters and stick the IR transmitter onto
the audio/video source so that it is aligned with the
infrared receiver on this device. The top of the diode
should be approx. 1 cm away from the infrared receiver
(see diagram below).
Using more than one device
As the infrared extender has two IR transmitters, you can
simultaneously operate more than one device remotely
from the receiver. For example, you can use the video
recorder as well as the DVD player in another room.
• Attach an IR transmitter as described above to each
device that you want to use in another location.
Connecting more than one device
You can also connect a second device to the transmitter that
14