Coccolle Beyle Bedienungsanleitung Seite 8

EN
Parts list:
1. Canopy
2. Seat
3. Bumper Bar
4. Safety Buckle
5. Leg rest
6. Footrest
7. Front Wheels
8. Handle
9. Shoulder pad
10.Rear Wheels
11.Handle Released Button
12.Adjustable Button
13.Basket
14.Brake Lever
I. Assembly
Stroller unfolding: see pic.1, hold the handle and press the unlock button 1 while
pressing button 2 and lift up the handle until hear "click", then the stroller is
locked in open position, as pic.3.
Assembly of the rear wheels: see pic.4, insert the axles of the rear wheels into
the plastic holes until the "click" sound can be heard after the rear wheel is fixed.
Assembly the front wheels: see pic.5, insert the two front wheels into the plastic
holes until "click" sound can be heard after the front wheel is fixed.
Assembly of the bumper bar: insert the joint into plastic hole on both sides of
stroller until you hear a "click" sound.
Canopy adjustment: according to pic.7, open the canopy and stroller will be
completely installed.
II. Use instructions
Backrest adjustment: see arrow 1, press down the adjusting button on backrest
to adjust the backrest to lower position. In order to adjust the backrest to upper
position lift up the D-ring.
Footrest adjustment: according to pic.2, press both down the button on both
sides to lower position. According to pic.3, lift up the footrest to adjust into
sleeping position.
Canopy utilisation: according to pic.4, pull out the canopy to open it. According
to pic.5, pull back the canopy to close it.
Brakes utilisation: according to pic.6, lift up the brake lever until you hear a
"click" sound, then the brake is released. According to pic.7, step down the
brake lever until you hear a "click" sound, then the brake is locked.
Front wheels detachment: according to pic.8, press the button and pull down the
front wheel.
Rear wheels detachment: see pic.9, press the button and pull out the rear
wheel.
Using The Safety Harness: Press the button in the middle to release the safety
harness. To secure the safety harness, slide the clip on both sides into the
safety buckle until you hear "click". As shown in figure, slide the adjusting button
to adjust the belt length.
8