I. Full Display menu
1.
TIME: 00:00-99:59 minutes
2.
DISTANCE (DST): 00.00-99.99 KM
3.
SPEED (SPD): 000.0-999.9 KM/H
4.
TOTAL DISTANCE (ODO): 000.0-999.9 KM
5.
CALORIE (CAL): 000.0-999.9
6.
PULSE (PULSE): 000-999
II. Function Description
1. Scan
Step on the bike pedal or press the "button", the LCD will show TIME, SPD, DST, CAL, ODO, PULSE
in turn at 5 seconds. The "exercise time" will stop counting after 3 seconds the bike stops.
2. Fixed display data
At the corresponding display data, press the "button" to display the specified data fixedly; For
example, press the "button" during DST display to display the "distance" data continuously on the
LCD until the "button" is pressed again.
3. Pulse
If both hands hold the metal piece on the bike handlebar at the same time, the heart rate data will
be displayed on console screen. If one hand does not hold the metal piece or both hands do not hold
it, the heart rate data will not display, will only display P.
4. Data clearing
If you want to re-record your exercise data, long press the "button" for 3 seconds, TIME, SPD, DST,
CAL, and the data will be cleared, but the ODO data will be retained for the next exercise
accumulation.
Cleanliness: Comprehensive cleaning will extend the life of the spin bike.
Remove dust regularly to keep it clean. Make sure the sports shoes are clean and avoid bringing
foreign objects into the spin bike.
Maintenance: Replace the defective parts immediately or do not use the spin bike until the
defective parts are replaced. Please pay special attention to the most easily worn
components.
5. Operational Instructions
6. Maintenance