Merax MS304750 Benutzerhandbuch Seite 19

Step 5
Take out D# Saddle. Please do as below: place the saddle onto the slider, tighten it at a suitable
angel with L-2# Combination wrench.
Step 6
Take out handlebar B#, remove the pre-attached screw set C-1#. Please do as below: Insert the
handlebar inside the hole of the handlebar post. Tighten the screw set C-1# withL-1# Allen Key
(5mm). then take out the mobile phone holder A# and snap it into the handlebar B#.