ANSMANN Racing xMove 2.0 evo Bedienungsanleitung Seite 9

value ranges from 10 to 720min. As the same principle,there is a
maximum-cap acity-limited function.
See , the value ranges from 10 to 20000mAh. At the screen
A8
you can set the audible sounds to be on or off by this program. When
you use the car bat tery to supply power for charger, screen shows
you this program monitors the voltage of input DC battery. If the vol-
types
iterm
Standard voltage
(V/cell)
Max. Charge
voltage cut off
level (V/cell)
Allowable fast
current
Min.Discharge
voltage cut off
level (V/cell)
Intelligent digital balance charger xMove 2.0 evo
A9
Li-Po Li-10
3.70 3.60
4.20 4.10
1C 1C
3.00 3.00
tage drops below the value you set the operation forcibly terminated
to protect the input battery.
You can adjust the brightness of LCD screen at the charger (see
Please refer the information below(chart A), and select the
correct parameter for each battery, or it will cause a serious
result!
Li-Fe NiMH
3.30 1.20
3.60 1.60
4C 2C
2.00 1.00
).
A11
chart A
NiCD Pb
1.20 2.00
1.60 2.45
2C 0.4C
0.85 1.55
9