Inhaltsverzeichnis; Special Features - Ansmann Racing Xmove 2.0 Evo Bedienungsanleitung

Intelligent digital balance charger
xMove 2.0 evo
Instruction Manual
Content
1. Special Features ................................................2
2. Performance Parameter ......................................3
3. K ey Features ....................................................3
4. Warning and Safety Notes ...................................3
5. Exterior...........................................................4
6. Programming Guide ...........................................6
7. Operating Instructions ........................................7
8. Warning and Error Messages .............................. 16
9. Maximum Circuit Power Chart ............................ 17
10. After-Sale Service and Guarantee ........................ 18
2
We reserve the right to commit modifications. Copyright reserved.

1. Special Features

1.1 The charger use an advanced charging calculation and design.
1.2 This item adopt prevalent Synchronous buck & boost converter
technology ,this makes conversion efficiency up to 90%.
1.3 Accept all types of R/C batteries: LiPo, LiIo, LiFe, NiMH, NiCd, Pb.
1.4 Simple and efficient user interfacemakes operation easy,with
powerful function andabundant content. Real-time shows you
the battery voltage, charge current, temperature of batteries,
capacity of charge/discharge, elapsed time, input voltage
etc., therefore, you can inquire the present state and establish
various safety-limited parameters conveniently.
1.5 The charger use an individual-cell-voltage balancer to maintain
your pack in balance while charging/discharging. During
the process,it can monitor and balance each cell of the pack
individually (Tolerance:±0.01V)
1.6 Accept individual battery charging/discharging, so you can
extend the scope of application of the charger. That is equally
useful for the DIY battery.
1.7 Various of charging mode to meet different demand: charging-
auto/balance charging/fast charging/storage and cyclic
charging etc.
1.8 For users convenience it can store and loadmaximum five data
of different batteries. You can establish the data contains pro-
gramsetting of the battery to charge or discharge continually.
These data can be called out at any time you need and the
process can be executed without program setting.
1.9 Perform 1-5 cycles of charge>discharge or discharge>charge
continually for NiMH/NiCd refreshing
1.10 You can connect a high-precision digital temperature sensor
to protect the charger works in a safety temperature. Once
a battery reaches the maximum temperature you set during
charge/discharge, the process will be terminated to protect
the battery. This is very important forNiMH/NiCd (separately
purchased temperature sensor).
1.11 For technical expert, EV offers PC based programcan analysis
the characteristic of the battery by USB port. It shows a graph
of voltage, current, capacity and temperature curves. And it
also shows the individual voltage of each cell in the Lithium
battery pack.
Instruction Manual