ANSMANN Racing xMove 2.0 evo Bedienungsanleitung Seite 15

7.6.1 save data
7.6.2 load data
Intelligent digital balance charger xMove 2.0 evo
Press "Mode/Esc" key to the screen on the left, then press
"Enter/Start" key to enter into the submenu.
The blinking (01) shows you the data (NO), you can press
" Dec"/" Inc" key to change it. Press " Dec"/" Inc" key can
select the type of battery, voltage,capacity ,and you can set themby
pressing "Enter/Start" key formore than 2 seconds to select the
charge mode.
Setting up charge/discharge current and final voltage.
To save the data, press "Enter/Start" key formore than 2 seconds.
Press "Mode/Esc" key to the screen on the left, then press
"Enter/Start", key to enter the submenu.
You can press " Dec"/" Inc" key to select the data number when
the field is blinking.
Press "Enter/Start" key for more than 2 seconds,it will shows you the
left screen, loading the data.
15