2. Performance Parameter
2.1 Input voltage range
2.2 Charge current range
2.3 Discharge current range
2.4 Charge power limited
2.5 Discharge power limited
2.6 Balance current
2.7 Balance tolerance
2.8 NiCd/NiMH battery cell count
2.9 Lithium battery types
2.10 Lithium battery cell count
2.11 Pb battery voltage
2.12 Weight
2.13 Dimensions
3. Key Features
Mode/Esc
mode selection/stop/back button Press this key to the mainmenu
and to stop during the process.
Dec/ Inc
reduce and increase button, you can drowse other concerning infor-
mations by this button during the charge/discharge process. When
you are setting parameters, press Dec key for reduce and
Inc key for increase.
4. Warning and Safety Notes
WARNING: Read the ENTIRE instruction manual to become familiar
with the features of the product before operating. Failure to operate
the product correctly can result in damage to the product, personal
property and cause serious injury.
WARNING: Failure to exercise caution while using this
product and comply with the following warnings could
result in product malfunction, electrical issues, excessive
heat, FIRE, and ultimately injury and property damage.
• Never leave the power supply, charger and battery unattende
during use.
• Never attempt to charge dead, damaged or wet battery packs.
Intelligent digital balance charger xMove 2.0 evo
DC 12.0 ∼ 18.0 V
0.1 ∼ 10.0 A
0.1 ∼ 5.0 A
max. 200 W x2
max. 25 W x2
max. 250 mA
+/- 0,01 V
1 ∼ 18 cells
Li-Po, Li-Ion, Li-Fe
1-6 series
2-20 V
880 g
201 x 175 x 73 mm
Start/Enter
"Enter/Srart": select/enter button, to start work by press it more
than 2 seconds.
• Never attempt to charge a battery pack containing different
types of batteries.
• Never allow minors to charge battery packs.
• Never charge batteries in extremely hot or cold places or place
in direct sunlight.
• Never charge a battery if the cable has been pinched or
shorted.
• Never connect more than one battery pack to this charger at
a time.
• Never connect the charger if the power cable has been pinched
or shorted.
3