Exterior - Ansmann Racing Xmove 2.0 Evo Bedienungsanleitung

• Never connect the charger to an automobile 12V battery while
the vehicle is running.
• Never attempt to dismantle the charger or use a damaged
charger.
• Never reverse the positive and negative terminals.
• Never connect the input jack (DC input) to AC power.
• Always use only rechargeable batteries designed for use with
this type of charger.
• Always inspect the battery before charging.
• Always keep the battery away from any material that could be
affected by heat.
• Always monitor the charging area and have a fire extinguisher
available at all times.
• Always end the charging process if the battery becomes hot to
the touch or starts to change form (swell) during the charge
process.

5. Exterior

USB port
Temp. Sensor
4
• Always connect the charge cable to the charger first, then
connect the battery to avoid short circuit between the charge
leads. Reverse the sequence when disconnecting.
• Always connect the positive red leads (+) and negative black
leads (-) correctly.
• Always disconnect the battery after charging, and let the
charger cool between charges.
WARNING: Never leave charger unattended, exceed maxi-
mum charge rate, charge with non-approved batteries or
charge batteries in the wrong mode. Failure to comply
may result in excessive heat, fire and serious injury.
CAUTION: Always ensure the battery you are charging
meets the specifications of this charger and that the
charger settings are correct. Not doing so can result in
excessive heat and other related product malfunctions,
which can lead to user injury or property damage.
Instruction Manual
LCD screen
button w/light indication
Touch Key
balance port
output port