Trouble Shooting - Schaub Lorenz GSP14SGA++ K Bedienungsanleitung

NOTICE! If the appliance cannot work due to icing, please contact the
aftersales service.
General operating instructions
After every programme: Turn off the water supply. Leave the door slightly opened
so the moisture can escape and unpleasant odours cannot occur.
Unplug the appliance: Unplug the appliance before you clean or maintain it.
Do not use any solvents or abrasive cleaners: Clean the exterior and rubber
components using a cloth and warm, soapy water. Use a water-moist cloth and a
small amount of vinegar or a cleaning product made for dishwashers exclusively to
remove spots or stains inside the appliance.
Moving of the appliance: If you have to move the appliance, move it in vertical
position..
Seals: Clean the seals periodically using a damp sponge so unpleasant odours cannot
occur.
Decommissioning
1. When you do not operate the appliance for a certain period of time, e.g. during
holidays/vacancies, let a programme run (empty appliance) before.
2. Disconnect the plug und turn off the water supply of the appliance.
3. Leave the door slightly ajar to protect the seals and to avoid the generation of
unpleasant odours.

8. Trouble shooting

WARNING! Disconnect the appliance from the mains before you clean
or maintain it.
POSSIBLE CAUSES
1. The fuse in the fuse box is tripped.
2. The appliance is not supplied with
energy.
3. Low water pressure.
1. Drain hose is kinked.
ERROR
Appliance does not work at all.
1. Check the fuse box.
2. Check that the appliance is supplied
3. Check the water supply.
Drain pump does not work.
1. Check drain hose.
MEASURES
with energy / the door is closed
properly / the plug is in the socket.
62