Installation; Unpacking And Positioning - Schaub Lorenz GSP14SGA++ K Bedienungsanleitung

2. Installation

Height
Width
Depth (with the door closed)
Water pressure

2.1 Unpacking and Positioning

1. Unpack the appliance carefully. Completely remove the transport-protection. Be
very careful and do not use any aggressive or abrasive detergents to remove
residuals of the transport-protection.
2. The spray arms may be equipped with a transport protection. Remove the
transport protection before installing the appliance.
3. Install the appliance in a dry and well-ventilated place.
4. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
5. Connect the appliance to the mains properly.
6. The nameplate is inside the appliance or at the back.
845 mm
598 mm
600 mm
0.04 - 1.0 MPa
42