Cleaning And Maintenance - ECG VT 7220 2in1 Simply Clean Bedienungsanleitung

1. To remove the handheld vacuum cleaner from the floor vacuum cleaner press the release button on the
handle of the handheld vacuum cleaner.
2. Grasp the handle of the hand-held vacuum cleaner and pull it out of the floor vacuum cleaner.
3. If you want to return the hand-held vacuum cleaner to the holder in the floor vacuum cleaner, first insert
the lower part of the hand-held vacuum cleaner into the floor vacuum cleaner holder and then push the
hand vacuum cleaner in such a way that it clicks into place.
Vacuuming
Note: The floor vacuum cleaner is not working without a properly inserted and charged hand-held vacuum
cleaner.
The vacuum cleaner is great for cleaning the stairs, making this unpleasant work a breeze.
1. Make sure that the handheld vacuum cleaner is properly installed in its place.
2. Press the power button on the handle of the floor vacuum cleaner. The suction power of the vacuum
cleaner can be controlled by the speed setting button.
Using the tapered nozzle 2 in 1
You can use the tapered nozzle directly with the handheld vacuum cleaner.

CLEANING AND MAINTENANCE

Replacement and cleaning of the dust container filter
To make sure that the vacuum cleaner always delivers optimum performance, empty the dust container after
each use and clean the filter.
1. Remove the hand-held vacuum cleaner from the holder in the floor vacuum cleaner.
2. Press the dust container release button and remove the container.
3. Remove the dust container filter.
4. Empty the container.
Rinse the container in cold water and before inserting it back in the dust container allow the filter to
5.
dry thoroughly. Do not wash the dust container filter in the washer. For drying, do not use a hair dryer,
allow the filter let to dry by itself.
Replace the filter carefully in the dust container. NEVER use the vacuum cleaner without inserted filter.
6.
7. Insert the dust container in the handheld vacuum cleaner.
WARNING: The suction opening must be permeable and free of obstructions in all circumstances.
Otherwise, it could lead to engine overheating and damage to the appliance.
Note: Depending on the intensity of use, we recommend replacing the filter every 3 to 6 months with a
new one in order to guarantee top performance of the appliance.
Cleaning the vacuum cleaner
Make sure before cleaning that the vacuum cleaner is not connected to the charger.
Use soft and slightly moist cloth with a few drops of detergent to clean the vacuum cleaner. Never use solvents
or other abrasive cleaners.
Never immerse the vacuum cleaner or the adapter in water or any other liquid and do not place it under
running water.
During regular cleaning also clean the wheels and their bearings.
Cleaning the rotary brush
If the rotary brush is blocked for some reason, the vacuum cleaner will move more slowly. In this case, the
rotary brush must be cleaned.
1. Press the rotary brush pull-out lock.
2. Remove the brush from the floor nozzle and clean it, then put it back in place.
7