and knowledge, if they are supervised or have been instructed to
use the product in a safe manner and understand the potential
dangers. Children shall not play with the appliance. Cleaning and
maintenance performed by the user should not be done by children
unless they are older than 8 years and under supervision.
19. Children under 8 years old must keep away from the appliance and
its power supply.
USING THE VACUUM CLEANER
Assembling the appliance
Note: Before assembling the handle, make sure the appliance is not connected to the charger.
1.
Remove the vacuum cleaner and all accessories from the box. Remove all stickers and protective foils.
2.
Lift the handle away from the body of the vacuum cleaner, align it with the body of the vacuum cleaner
and click on it with light pressure (fig. 1).
3.
Fit the desired nozzle onto the body of the vacuum cleaner and push it firmly until the nozzle anchors in
place (fig. 2).
Vacuum cleaner charging
Note: The hand-held vacuum cleaner and floor vacuum cleaner can not be used during charging.
1.
Place the vacuum cleaner near an electrical outlet and connect the power adapter to an electrical outlet.
2.
Connect the charger to the charging socket. The light will flash as soon as the appliance starts charging
and comes on fully when the appliance is fully charged. The usual charging time is 4 - 6 hours.
3.
The adapter may become hot during charging, this is normal.
4.
When not using the vacuum cleaner, leave it connected to the charger. This ensures that it is always ready
for operation.
Dust container assembly
Note: Before cleaning the dust container, make sure the appliance is not connected to the charger.
1.
Remove the hand-held vacuum cleaner from the holder in the floor vacuum cleaner. Press the dust
container lock button and remove the dust container and clean it.
2.
Make sure that a dust filter is inserted into the dust container and then attach the dust container to the
hand-held vacuum cleaner.
Removing the hand-held vacuum cleaner from the floor vacuum cleaner
Note: Before handling, make sure the appliance is not connected to the charger.
6