Werbung
Verfügbare Sprachen
Verfügbare Sprachen
page EN-14
Using and caring for the hob
Using the sensors correctly
Your hob is operated using sensors. They are
very sensitive and will react even when you
move your fingers closer. You can therefore
find some tips on correct sensor operation
here.
• When touching the sensors, only use the
entire fingertip and not just the very end
of the fingertip.
• When touching a sensor, do not apply any
pressure.
• Only touch one sensor at a time.
• Ensure that none of the sensors are cov-
ered (e.g. by a potholder).
When a sensor is touched, an acoustic signal
will sound.
Cooking zone data
Cookware
Cooking
dimensions
zone
in mm
Top right
100–140
Medium large
190–280
100/
Entire left
220×380
Top left
100–200
Bottom left
100–200
Pot recognition
Pot recognition is installed in the cooking
zones. Pot recognition ensures that the cook-
ing zones will be activated only if there is a pot
with a ferromagnetic base or another object
made of the same kind of metal located there.
The cooking zone becomes inactive as soon
as the pot or the magnetic object is removed.
Switching the hob on and off
0
5
0
5
• To switch off the hob, touch the On/Off
sensor
A beep will sound and "
displays. The hob is now in standby mode.
• To switch the entire hob off, touch the On/
Off sensor
hob on, the hob will switch off automatically.
max. output
in W
1400/2000
3000/3600
3000/3600
2000/3200
2000/3200
10
P
10
P
(12) and hold it down briefly.
" will appear on all
– –
.
If you do not press a sensor or do not
place suitable cookware on the cooking
zone within one minute of switching the
0
5
10
P
0
5
10
P
Werbung
