Sharp XV-110ZM Serviceanleitung Seite 20

5-4. Adjustment
5-4-1. R-B adjustment
1) Put the shading sheet at the G-LCD section (G cut).
2) Overlap the B squares to the R squares.
Adjust the X-axis for the horizontal direction and the Y-axis (R and L) for the vertical direction.
* Turn the Y(R) control to make the right-hand side enlarged and the left-hand side shrunk, both at a
time. Turn the Y(L) control to make the opposite.
Hexagon screws
5-4-2. R-G adjustment
1) Put the shading sheet at the B-LCD section. Do the same as above.
Hexagon
Screws
20