Sharp XV-110ZM Serviceanleitung Seite 19

5, X-axis and Y-axis adjustment
5-1. Tools
1) Shading sheet (to block the light source)
2) Standard lens
Adjustment outline
With R image as reference, adjust the vertical and horizontal positions of the G and B images.
Structurally, the LCD holder can be moved in the X- and Y-axis directions independent of the base.
Base fixing screws
Base fixing Pixie
5-2. Preparations for adjustment
1) Loosen the five hexagon screws at the right
and left of the LCD unit base.
2) Feed the grid signal to the video input.
Screws {2 pcs.)
Screws
(3 pcs.)
5-3. Adjusting points
1) Overlap the G and B images referring to the R
image.
2) The projected patterns should be perfectly
aligned up to the second square around the
center.
3) The outermost lines of the colours should not
be apart from each other.
The projected patterns should be perfectly aligned
up to the second square around the center.
———_—_—— ee ee
The outermost lines of the colours should not be
apart from each other.
19