Werbung
Verfügbare Sprachen
Verfügbare Sprachen
panel from dust for the adjustment.
Adjustment position
Adjustment condition
Adjustment method
Obtain a proper image on the
(R524)
(13) and GND.
3. Short-circuit between
1C501
pin
(14) and GND through a capacitor
of 0.01 uF.
4. Short circuit between
pin (5) of
IC601 and +5V.
Phase adjustment
( R648)
. Receive monoscope pattern.
2. Connect oscilloscope between
respective Q605 and Q518 emitter
and GND.
SL
_ fl
Q605 emitter
Adjust
it so that
phase
of
respective waveform aligns with
each other as shown in the figure
above.
H-BLK Pulse adjustment
R608 (phase)
R610 (width)
. Receive monoscope pattern.
2. Connect oscilloscope between
Q404 emitter and IC602 pin (6) and
GND.
Q404emitter
.
a: 1C602
p i n
(6
:4 >:
pin (6)
9 usec
Counter electrode,
Amplitude adjustment
R (R1471)
Connect oscilloscope between pin (12)
of R, G and B connectors and GND.
Adjust
each
waveform
to
5.0 +0.1Vp-p.
Counter electrode bias
the one to be
12
Werbung
