Sharp XV-110ZM Serviceanleitung Seite 10

Disassembly of the Ballast Unit, Fan
and Power PWB
1. Remove the side panel and remove three screws
@ fixing the ballast unit.
2. Remove four screws © fixing the fan.
3. Remove four screws © fixing the power PWB.
Disassembly of LCD Panel
1. Remove the side panel and main PWB.
2. Remove two screws @ fixing each LCD panel
(R.G.B) to take them off.
Cleaning the LCD Panel
Disassembly of the Lamp
1. Remove seven screws © fixing the rear panel.
2. Remove the two screws © fixing the cover.
3. Remove the screw @ fixing the lamp angle.
10