Abilica PacificRower Bedienungsanleitung Seite 7

MONTERING / ASSEMBLY/ ASENNUS/ MONTAGE
NOTE: We recommend being 2 people to assemble the product.
STEP 1:

Turn over the Slide Rail (#3), the Rear Stabilizer (#4) and the seat (#36) as
below picture.

Slide the seat (#36) onto the rail (3). Attach Limit Pad (35) to the Slide Rail (#3)
and secure with two screws (67).

Attach the Rear Stabilizer (#4) to the Slide Rail (#3), tighten with 4 Washers
(#71) and 4 Hex head screws (#66).
#66 M8*15 4pcs
#67 M6*10 2pcs
#71 OD20*ID8.5*1.5 4pcs
#75
3
#35 Limit pad 1pc
S13-17
4
66
66
71
67
35
7
71
36