Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
To lift the load, turn the winding handle clockwise.
2.
To lower the load, turn the winding handle counter clockwise.
Note: Observe the arrows on the housing.
3.
To position a person where needed, simply let go of the winding handle.
An integrated automatic brake keeps the winding handle from turning back.
Maintenance intervals
-
In the case of continuous operation with up to 100 % of the nominal load of 300 kg:
after 1000 m hoisting and lowering.
-
In the case of continuous operation with up to 50 % of the nominal load of 150 kg:
after 2000 m hoisting and lowering.
-
but at least every 12 months
The maintenance work may only be operated by certificated persons in accordance with the
IKAR maintenance manual:
Between these intervals, carry out the following checks
-
Check that the crank moves easily.
-
Check that the ratchet latches in.
ENGLISH
Operation of the winch
Lowering
Lifting
12
Werbung
