Control Panel; Temperature Setting Buttons - AEG SANTO 75438 KG Gebrauchsanweisung

Control panel

A B
A Fridge section indicator
B Temperature indicator for fridge section
C Buttons for setting temperature for fridge section
D Thermometer indicator for fridge section (with COOLMATIC)
E MODE button for setting the operating mode
F Text display
G RESET button
H Freezer section indicator
I Temperature indicator for freezer section
L Buttons for setting temperature for freezer section
M Thermometer indicator for freezer section (with FROSTMATIC)

Temperature setting buttons

The temperature is adjusted using the „+" (WARMER) and „-" (COLDER)
buttons.
These buttons are connected to the temperature display.
• The temperature display is switched over from the display of the ACTUAL
temperature (Temperature display is illuminated) to the display of the
DESIRED temperature (Temperature display flashes) by pressing one of the
two buttons, „+" (WARMER) or „-" (COLDER).
• Each time one of the two buttons is pressed again the DESIRED
temperature is adjusted by 1 °C.
• If neither button is pressed, the temperature display automatically
switches back after a short period (approx. 5 sec.) to the display of the
ACTUAL temperature.
Downloaded from Fridge-Manual.com Manuals
MODE
D
E
C
RESET
F
H I
G
M
L
9