Herunterladen Inhalt Inhalt Diese Seite drucken

Variable Inner Door; Moisture Regulator; Variable Storage Box; Fresh Food Refrigeration - AEG SANTO C 8 18 42-4 I Gebrauchs- Und Einbauanweisung

Integrierbare kühl-gefrierkombination
Inhaltsverzeichnis

Werbung

underlying storage shelf.

Variable Inner Door

The door compartments can be pulled up and removed, and inserted at
other positions as needed.

Moisture regulator

There is an adjustable air grille in front of the shelf above the fruit and vege-
table compartments.
The opening in the ventilation slots can be adjusted with the slider.
Right slider: Ventilation slots opened.
With the ventilation slots open, more
air circulation results in a lower air
moisture content in the fruit and
vegetable compartments.
Left slider: Ventilation slots closed.
When the ventilation slots are closed,
the natural moisture content of the
food in the fruit and vegetable com-
partments is preserved for longer.

Variable Storage Box

Some models are equipped with a variable storage box which is fitted under
a door shelf compartment and can be slid sideways.
The box can be inserted under any
door shelf compartment.
1.
To change the position of the stora-
ge box; lift the shelf compartment
with the box upwards and out of the
holders in the door and remove the
retaining bracket out of the guide
under the shelf compartment.
2.
Reverse the above operation to insert
the shelf at a different height.

Fresh food refrigeration

To obtain the best performance:
• do not store warm food or evaporating liquide in the refrigeator
• do cover or wrap the food, particularly if it has a strong flavour.
• Position food so that air can circuiate freely round it.
Downloaded from Fridge-Manual.com Manuals
42
Die Schiene (Ha) auf der Innen-
seite der Möbeltür oben und
unten auflegen (siehe Abb.) und
die Position der äußeren Bohrlö-
cher anzeichnen. Nachdem die
Löcher gebohrt wurden, die
Schiene mit den mitgelieferten
Schrauben befestigen.
Die Abdeckung (Hc) in die Schie-
ne (Ha) eindrücken, bis sie einra-
stet.
Gerätetür und Möbeltür auf ca.
90° öffnen. Den Winkel (Hb) in
der Schiene (Ha) einsetzen. Gerä-
tetür und Möbeltür zusam-
menhalten und die Bohrlöcher
anzeichnen (siehe Abb.).
ca. 50 mm
90°
90°
ca. 50 mm
Ha
Hc
PR33
8mm
Ha
Hb
PR167
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis