If you return the motor, always return the com-
plete drive unit with the switch.
15. Special Accessories
Cross cutting jig
Circular cutting device
Bit stop
Grinding belt device
Underframe for tables
Automatic starter, type ALV 2
Type ALV 10
Saw bands
for wood:
12/0.5/2360 mm, 4 teeth/inch
Standard saw band
15/0.5/2360 mm, 4 teeth/inch
Straight upright cuts with longitudinal stop
for wood and synthetic materials:
6/0.5/2360 mm, 6 teeth/inch
Turning works with small radius 25 mm
12/0.5/2360 mm, 6 teeth/inch
Precision cutting works
Different materials:
wood, synthetic materials, metals
3.5/0.5/2360 mm, 14 teeth/inch
Extra-fine cutting works, extremely small radiuses
Non-ferrous metals up to 10 mm
6/0.65/2360 mm, 22 teeth/inch
straight cuts and turning works
Synthetic materials, non-ferrous metals
6/0.65/2360 mm, 10 teeth/inch
Synthetic materials, non-ferrous metals above 15
mm
12/0.65/2360 mm, 10 teeth/inch
straight cuts and large radiuses > 60 mm
28 | GB
16. Disposal and recycling
7312 0025
7319 0710
7319 0710
rial, such as metal and plastic. Defective components
7319 0710
must be disposed of as special waste. Ask your deal-
7319 0709
er or your local council.
7910 4010
7910 4020
Old devices must not be disposed of with house-
hold waste!
7319 0701
7319 0704
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point. This
can occur, for example, by handing it in at an author-
ised collecting point for the recycling of waste elec-
7319 0702
trical and electronic equipment. Improper handling
of waste equipment may have negative consequenc-
es for the environment and human health due to po-
7319 0705
tentially hazardous substances that are often con-
tained in electrical and electronic equipment. By
properly disposing of this product, you are also con-
tributing to the effective use of natural resources.
You can obtain information on collection points for
7319 0706
waste equipment from your municipal administration,
public waste disposal authority, an authorised body
for the disposal of waste electrical and electronic
equipment or your waste disposal company.
73190707
73190703
73190708
www.scheppach.com
The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be re-
used or recycled. The equipment and its ac-
cessories are made of various types of mate-
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical