AEG BSE778380T Benutzerinformation Seite 66

Step 1 Place the deep pan on the first shelf position.
Step 2 Fill the water drawer with water to the maximum level until the signal sounds or the display shows
the message.
Step 3 Select: Menu / Cleaning / Rinsing.
Duration: around 30 min
Step 4 Turn on the function and follow the instruction on the display.
Step 5 When the function ends, remove the deep pan.
When this function works, the lamp is off.
11.8 How to use: Tank emptying
Use it after cooking with steam heating function to remove the residual water from the water
drawer.
Turn off the oven and wait until it is cold.
Step 1 Place the deep pan on the first shelf position.
Step 2 Select: Menu / Cleaning / Tank emptying.
Duration: 6 min
Step 3 Turn on the function and follow the instruction on the display.
Step 4 When the function ends, remove the deep pan.
When this function works, the lamp is off.
11.9 How to remove and install:
Door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.
WARNING!
The door is heavy.
Before you start:
CAUTION!
Carefully handle the glass, especially
around the edges of the front panel. The
glass can break.
Remove all accessories.
ENGLISH 65