Troubleshooting - Fronius BSL-Tool Bedienungsanleitung

Troubleshooting

Troubleshooting
Unable to update firmware
Cause:
Remedy:
Message "Incorrect ID" or "Unknown CPU ID"
Cause:
Remedy:
Cause:
Remedy:
Message "Timeout on COM1!"
BSL Tool attached, LED unlit
Cause:
Remedy:
Message "Timeout on COM1!"
BSL Tool attached, LED lit
Cause:
Remedy:
Older version of "BasicLoad" installed on PC
Install a newer version of „BasicLoad" on your PC and relaunch the
update
BSL Tool attached to wrong PCB
Attach BSL Tool to correct PCB and relaunch the update
Incorrect firmware selected for update
Select correct firmware and relaunch update
Power supply switched off
Switch power supply on and relaunch update
COM port incorrectly configured
Check your port settings and change if required. Then relaunch up-
date.
21