General; Machine Concept; System Requirements; Scope Of Delivery - Fronius BSL-Tool Bedienungsanleitung

General

Machine concept

Our BSL-Tool and BASICLoad software allow you to update the firmware of
power source, wire feeder and Fronius welding database, using a PC.
-
-
-
Updating - basic principle
IMPORTANT! Updates via LocalNet are also possible using the LocalNet RS 232
interface. How to carry out an update via LocalNet is described in the „LocalNet
RS 232 interface" operating instructions, item no. 42,0410,0691.
System require- -
ments -
-
-
-
Scope of deli-
very
14
Updating firmware of power source via "pc board UST"
Updating firmware of wirefeeder via "pc board XX"
Updating firmware of digital bus controllers via "pc board UBST"
PC, Pentium 166 or higher
16 MB RAM or more
VGA graphics adapter with 256 colours (640x480)
double-speed CD-ROM drive
MS Windows 95/98/NT/XP
(1)
(2)
E-Mail Update
BSL - Tool
(1) BSL Tool with flat cable
(3)
(2) RS232 interface cable
(3) BasicLoad software and firm-
ware
BasicLoad