Concept VS5040 Bedienungsanleitung Seite 17

Acknowledgment
Thank you for purchasing a Concept product. We hope you will be satisfied with our product throughout its service
life.
Please study the entire Operating Manual carefully before you start using the product. Keep the manual in a safe place
for future reference. Make sure other people using the product are familiar with these instructions.
Technical parameters
Voltage 220–240 V ~ 50 Hz
Power input 30 W
Noise level <60 dB(A)
IMPORTANT SAFETY PRECAUTIONS
• Do not use the unit differently than described in this manual.
• Remove all packing and marketing material from the unit before you use
it for the first time.
• Verify that the mains voltage corresponds with the values indicated on
the unit label.
• Place the unit on a stable surface, away from other sources of heat.
• Do not leave the unit unattended while it is turned on or plugged into
the power supply socket.
• When plugging and unplugging the unit into and from the socket, the
mode selector must be in the 0 (off) position.
• Never hold the power cord when disconnecting the unit from the socket;
grasp and pull the plug, not the cord.
• Do not allow children or legally incapacitated people to handle the unit;
the appliance must be used out of reach of such persons.
• Any physically challenged persons, persons with reduced sensory
perception or insufficient mental capacity, or persons who have not
been familiarized with the operation may only use the unit under the
supervision of a responsible, instructed person.
• Exercise utmost caution when using the unit while children are nearby.
• Prevent the unit from being used as a toy.
• Never insert fingers, pencils, or any other items through the mesh
protection of the fan.
• Never use the fan with the protective mesh removed.
• Do not expose children or ill people to direct air flow.
• Do not cover the unit.
VS504x
EN
Double or reinforced insulation
33